RP423BXPD Performance Peelable Coextruded CPP Film Series

General Description

The RP423BXPD series of CPP films is a tough, 2-side sealable, 1-side peelable coextruded film with excellent heat resistance and low temperature impact strength to –100 C. This CPP material is formulated with slip to promote downstream processing and is primarily intended as a sealant layer in laminations. Suitable for sealing to polypropylene trays and retort pouch applications including freezer-to-microwave.

Typical Physical Properties (1.0mil Film)

Property

Unites

Astm test #

Typical Value

Transmittance

%

43

Haze

%

D1003

N/A

Gloss

45°

D2457

N/A

Ultimate Tensile MD/TD

psi

D882

6,800
6,300

Ultimate Elongation MD/TD

%

D882

750
600

Secant MD/TD

psi

D882

88.000
85,000

Coefficient of Friction

gms

D1894

UT: <0.35

Yield

in²/lb

12,320

Regulatory Compliance

- FDA 21 CFR 177.1520 (a)3(i), (b), (c)3.1a, (c)3.2a including food contact applications under conditions of use C through G described in Table 2 of 21 CFR 176.170 (c), as well as food cooking application under retort conditions only, corresponding to FDA condition of use A.

Typical Film Section
Please note: 

TECHNICAL INFORMATION, RECOMMENDATIONS AND SUGGESTIONS HEREIN ARE FURNISHED WITHOUT CHARGE OR OBLIGATION. NO GUARANTEE IS MADE OF THEIR ACCURACY AND COPOL INTERNATIONAL LTD. ACCEPTS NO RESPONSIBILITY FOR RESULTS OBTAINED BY THE APPLICATION OF THIS INFORMATION OR THE SAFETY & SUITABILITY OF OUR PRODUCTS EITHER ALONE OR IN COMBINATION WITH OTHER PRODUCTS. 

VALUES ARE TYPICAL DATA AND SHOULD NOT BE INTERPRETED AS SPECIFICATIONS BECAUSE CONDITIONS MAY VARY AND ARE BEYOND OUR CONTROL, USERS ARE ADVISED TO MAKE THEIR OWN DETERMINATION OF THE SAFETY AND SUITABILITY OF EACH PRODUCT IN THEIR OWN APPLICATION. 

THERE IS NO WARRANTY AGAINST PATENT INFRINGEMENT. ALL PROPERTIES AND APPLICATIONS ARE PROVIDED AS INFORMATION ONLY AND THERE ARE NO WARRANTIES EXPRESSED OR IMPLIED OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE.