BHP2V Performance Coex CPP Film Series
This is a 3 layer slip modified coex structure consisting of a seal enhanced inner layer, heat resistant core and treated outer layer. This product can be used in laminated or stand alone applications requiring a temperature delta between the inner and outer layer. It is designed to provide good machinability and stiffness for Vertical and Horizontal FFS applications.
Property
Unites
Astm test #
Typical Value
Transmittance
%
Haze
%
D1003
6.5
Gloss
45°
D2457
78
Ultimate Tensile MD/TD
psi
D882
11,000
7,000
Ultimate Elongation MD/TD
%
D882
650
700
Secant MD/TD
psi
D882
119,000
120,000
Coefficient of Friction
gms
D1894
<0.30
Yield
in²/lb
20,533
FDA 21 CFR 177.1520 (a)(3)(i) and (c)3.1a
excluding food cooking applications, under
conditions of use C through H described
in Table 2 of 21 CFR 176.170(c)
TECHNICAL INFORMATION, RECOMMENDATIONS AND SUGGESTIONS HEREIN ARE FURNISHED WITHOUT CHARGE OR OBLIGATION. NO GUARANTEE IS MADE OF THEIR ACCURACY AND COPOL INTERNATIONAL LTD. ACCEPTS NO RESPONSIBILITY FOR RESULTS OBTAINED BY THE APPLICATION OF THIS INFORMATION OR THE SAFETY & SUITABILITY OF OUR PRODUCTS EITHER ALONE OR IN COMBINATION WITH OTHER PRODUCTS.
VALUES ARE TYPICAL DATA AND SHOULD NOT BE INTERPRETED AS SPECIFICATIONS BECAUSE CONDITIONS MAY VARY AND ARE BEYOND OUR CONTROL, USERS ARE ADVISED TO MAKE THEIR OWN DETERMINATION OF THE SAFETY AND SUITABILITY OF EACH PRODUCT IN THEIR OWN APPLICATION.
THERE IS NO WARRANTY AGAINST PATENT INFRINGEMENT. ALL PROPERTIES AND APPLICATIONS ARE PROVIDED AS INFORMATION ONLY AND THERE ARE NO WARRANTIES EXPRESSED OR IMPLIED OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE.
